1. Blog

Peter Robyn 18th of December, 2017

Read More
  • Out she comes.

    Out she comes.

  • Initially I thought I would sand and put coats of anti-foul on.

    Initially I thought I would sand and put coats of anti-foul on.

  • Plans changed and I ended up stripping her right back.

    Plans changed and I ended up stripping her right back.

  • Untitled photo
  • First coat of PR250 Primer

    First coat of PR250 Primer

    Port side, I like this colour.

  • First coat of primer PR250

    First coat of primer PR250

    Starboard side

  • First coat of epoxy tie coat - port side.

    First coat of epoxy tie coat - port side.

  • Top sides filled and ready to sand.

    Top sides filled and ready to sand.

  • Top coat of red anti-foul done , topsides filler and ready to sand.

    Top coat of red anti-foul done , topsides filler and ready to sand.

  • One coat of enamel on port top side - final red coat of anti-foul.

    One coat of enamel on port top side - final red coat of anti-foul.

  • Shiny :-)

    Shiny :-)

  • Prop clearance is 65 - 70 mm will an anode fit here?

    Prop clearance is 65 - 70 mm will an anode fit here?

  • For anode research.

    For anode research.

  • Prop anode does fit.  Needed the split pin holes exntended with 4mm drill and hack saw.  All good :-)

    Prop anode does fit. Needed the split pin holes exntended with 4mm drill and hack saw. All good :-)

    4mm clearance - all ok as shaft does not move aft at all.

  • Bottom ruder bracket anode 600g (I think) in place.

    Bottom ruder bracket anode 600g (I think) in place.

  • Prop anode - 4mm clearance and top rudder bracket and shaft anode (1kg).

    Prop anode - 4mm clearance and top rudder bracket and shaft anode (1kg).

  • Bow: finished and ready for launch

    Bow: finished and ready for launch

  • Port side - finished

    Port side - finished

  • Starboard - finished

    Starboard - finished

  • Love this view - nice and clean :-)

    Love this view - nice and clean :-)

  • Looking clean and shiny.

    Looking clean and shiny.

  • Re-launch

    Re-launch

  • Photo Sharing
  • About SmugMug
  • Browse Photos
  • Prints & Gifts
  • Terms
  • Privacy
  • Contact
  • Owner Log In
© 2022 SmugMug, Inc.
    Plans changed and I ended up stripping her right back.
    20171207_164742.jpg
    First coat of PR250 Primer